FAST SI-SI is a high-quality, water-based matte siloxane paint, intended for permanent outdoor coating on any construction surfraces, such as: cement-lime plaster, cement and polymer-mineral, dispersion, concrete, sandstone, brick, etc. It is only suitable for outdoors.
FAST SI-SI is based on a binder in the form of a water acrylic-styrene dispersion and a siloxane emulsion, creating a coating highly bound to the surface. FAST SI-SI contains an aqueous siloxane emulsion, which gives the coating an anti-dew effect due to surface hydrophobization, significantly reducing its wettability, i.e. water penetration with substances dissolved in it.
It inhibits the penetration of dirt carried mainly with water and the growth of microorganisms such as algae and fungi. The end result is a reduced susceptibility to staining, giving the coating a self-cleaning effect and excellent resistance to weather conditions. It can be dyed to the desired color according to FAST COLOR SYSTEM. It contains agents eliminating the growth of algae and fungi on the surface covered with paint.
bucket - 4 l
bucket - 10 l
Product's photo
The surface must be clean, dry, free of grease and dust. Scratches and defects must be repaired and filled. The paint should be applied on strong, compact surfaces. The surfaces to be painted should be thoroughly dusted and then washed with water. Rinse off any loose surfaces, and then apply the concentrate after priming with FAST GRUNT G Absorbent surfaces must be primed with FAST GRUNT U.
The paint can be used on the following surfaces:
CAUTION
In the case of using paints with very intense colors, due to their reduced coverage ability, the use of FAST GRUNT W base paint is required in a shade similar to the color of the paint prior to the painting.
FAST SI-SI is supplied ready to use but must be mixed thoroughly before use. When applying the first layer it is possible to thin the paint, if necessary, to a maximum of 2%. Apply the second layer without thinning. The paint can be applied with a roller, spray or possibly with a brush. When applying and drying the paint, observe the appropriate weather conditions, i.e. surface and ambient temperature from +8°C to + 25°C, no strong sunlight, no rain or too high relative air humidity above 75%. The drying time of one layer at the optimum temperature of
+20°C is about 2 hours. It is recommended to apply the subsequent layers after at least 4 hours. Follow the general technique of painting with wall paints. The paint coating acquires its full functional properties after complete hardening, i.e. after 28 days from the end of painting works.
Additional application guidelines:
In the case of using paints with very intense colors, due to their reduced coverage ability, the use of FAST GRUNT F base paint is required in a shade similar to the color of the paint prior to the painting.
Parameters of airless spray based on the WAGNER - ProSpray 3.23 device
water acrylic-styrene dispersion and siloxane emulsion with fillers and pigments
Store in factory-sealed packages, in dry rooms at a temperatures above +5°C.
While working, avoid direct contact with the skin and protect the eyes. In case of contact with the eyes, rinse immediately with plenty of water and seek medical advice. Rinse soiled skin immediately with plenty of water.
Keep away from children.
