Products

Products

Fast Grunt G

deeply penetrating and strengthening preparation based on fine-particle acrylic dispersion

Usage

FAST GRUNT G preparation is a ready-to-use, deep priming emulsion for use on all absorbent and porous surfaces such as: gypsum boards, drywall, gypsum, cement and cement-lime plasters, concrete surfaces, aerated concrete, ceramics, etc. Due to its remarkable ability to penetrate very deeply FAST GRUNT G is especially recommended for all old and crumbling surfaces.

Properties

FAST GRUNT G preparation is non-flammable, water-dilutable, does not saponify, is odorless, eco-friendly and can be used both indoors and outdoors. It strengthens the surface, regulates the absorbency of the surface due to the high vapor permeability, reduces paint consumption, "dries" wet walls and significantly improves the adhesion of adhesives to glaze. After drying, it is completely transparent. It is resistant to high alkalinity of the surface and does not contain toxic substances. It can be used ready-made or thinned with water in a 1:1 ratio.

Package

container - 2 l

container - 5 l

Documentation

Product's photo

Surface preparation

FAST GRUNT G can be used on dry surfaces, free of dust, wax, grease, oil, grease, impermeable paint coatings.
The emulsion can be applied with a brush or roller to the surface at a temperature of +5°C to +25°C. It is recommended to prime very absorbent or weak surface twice, the first priming with a 1:1 dilution with water, the second without dilution. Do not dilute the product on less absorbent surfaces. The primed surface is ready for further use after approx. 2 hours after priming. In case of skin contact, rinse with water.

Preparation and usage method

The emulsion can be applied with a brush or roller to the surface at a temperature of +5°C to +25°C. It is recommended to prime very absorbent or weak surface twice, the first priming with a 1:1 dilution with water, the second without dilution. Do not dilute the product on less absorbent surfaces. The primed surface is ready for further use after approx. 2 hours after priming. In case of skin contact, rinse with water.

USE

Depending on the type of substrate, Fast Grunt G consumption is from 0.05 to 0.25 l / m².

Technical data

Base unit
l
Base

fine particle dispersion acrylic resin

Density
about 1,0 kg/m3
Drying time
from hours
to 2 hours
Possibility of laying tiles
after about 2 hours
Usage
after min. 2 hours
Substrate and ambient temperature
from 5 °C
to 25 °C
Temperature resistance
from -20 st. C
to 70 st. C

Storage and warnings

Store in tightly-sealed packages, at a temperature of + 5°C to + 25°C. The shelf life is 12 months.


While working, avoid direct contact with the skin and protect the eyes. In case of contact with the eyes, rinse immediately with plenty of water and seek medical advice. Rinse soiled skin immediately with plenty of water.
Keep away from children.