FAST F–AZ is an acrylic paint intended for painting cement, cement-lime plasters, thin-layer plasters mineral and dispersion materials, as well as concrete surfaces. Intended for use on building facades that will be washed many times. It is a component of the ETICS FAST S thermal insulation system.
FAST F–AZ is an ecological paint based on acrylic resin with the addition of mineral fillers and pigments. It has excellent covering properties and is resistant to washing. It is vapor permeable and has a high resistance to weather conditions. It can be dyed to the desired color according to FAST COLOR SYSTEM. It contains agents eliminating the growth of algae and fungi on the surface covered with paint.
bucket - 4 l
bucket - 10 l
Product's photo
The surface must be clean, dry, free of grease and dust. Scratches and defects must be repaired and filled. The paint should be applied on strong, compact surfaces. The surfaces to be painted should be thoroughly dusted and then washed with water. Walls painted with chalk and loose surfaces should be washed off and then primed with FAST GRUNT G deeply penetrating concentrate. Drywall and absorbent substrates based on gypsum or dolomite must be primed with FAST GRUNT U. The paint can be used on the following surfaces:
FAST F-AZ is supplied ready to use but must be mixed thoroughly before use. When applying the first layer it is possible to dilute the paint to a maximum of 2%, if necessary. Apply the second layer without diluting. The paint may be applied with a roller, spray or possibly with a brush. When applying and drying the paint, observe the appropriate weather conditions, i.e. surface and ambient temperature from + 5°C to + 25°C, no strong sunlight, no rain or too high relative air humidity above 75%. The drying time of one layer at the optimum temperature of +20°C is about 2 hours. It is recommended to apply the subsequent layers after at least 4 hours. The paint coating acquires its full functional properties after complete hardening, i.e. 28 after the end of painting works.
Additional application guidelines:
NOTE
In the case of using paints with very intense colors, due to their reduced coverage ability, the use of FAST GRUNT F base paint is required in a shade similar to the color of the paint prior to the painting.
Parameters of airless spray based on the WAGNER - ProSpray 3.23 device
acrylic resin dispersion with addition of fillers and pigments
The paint is to be stored and transported in tightly closed, original packaging at temperatures between +5°C and +25°C.
While working, avoid direct contact with the skin and protect the eyes. In case of contact with the eyes, rinse immediately with plenty of water and seek medical advice. Rinse soiled skin immediately with plenty of water.
Keep away from children.
